Give us a call on 01726 862798 if you have any questions about the Garmin Striker 4
Garmin Striker 4 Fish Finder
Great Value Fish Finder with CHIRP sonar
A colour 3.5in display with CHIRP Sonar and a basic GPS plotter allowing you to mark your fishing spots and launch points. A brilliant fish finder for those on a budget.
Garmin Striker 4 fish finder with GPS
- More Info
- In The Box
- Mounting Options
- Transducer Installation
- Power Options
- Delivery
Garmin Striker 4
Bringing fantastic value for money, the Garmin Striker 4 is a great option for those looking for their first fish finder for a kayak or small boat. The compact size and easy-to-use controls means that even a complete novice can use the Striker 4 to improve their fishing and catch rate!
Featuring a bright colour 3.5in display with easy to use keypad button controls. The CHRIP dual-beam sonar will show you shoals of fish, or even bigger individual fish beneath your craft. CHIRP sonar sends a continuous sweep of frequencies, ranging from low 77khz to high 200khz, then interprets them individually upon their return. This provides a wider range of information and CHIRP sonar technology can create crisper fish arches with greater target separation - you get to see the fish clearer and easier!
The in-built GPS allows you to plot marks and navigate to and from your launch point or fishing spots. You can display your crafts speed on the screen. Split screen mode allows you to display both sonar and GPS on the screen at the same time. Please note that the Striker 4 only has a basic plotter with no chart functionality, so marks are displayed and stored on a white basemap.
The Striker 4 is a great budget option that is easy to use and will help find you your next catch. Add one to your kayak or boat today!
Please note this unit does not come with a battery. See the powering options tab for more details.
Features
- Includes CHIRP 77/220kHZ transducer
- Built-in GPS lets you mark waypoints, create routes and view boat’s speed
- Bright, sunlight-readable 3/5in display
- Convienient keypad operation
- Rugged design for every fishing environment
Need a visor for your fish finder? Reduce sun glare and spray build-up with a screen visor! We sell the BerleyPro Visor for the Garmin Striker 4 - Click Here to find out more.
Whats Included In The Box?
- STRIKER™ 4 fishfinder
- Garmin Dual Beam Transducer
- Power cable
- Tilt/swivel mount
- Transom and Trolling Motor Mounts plus Hardware
- Documentation
If you need to know what else you need to install a Fish Finder to your kayak, please refer to our Fish Finder Buyers Guide
Mounting Options - Fish Finder Headunit
RAM Fishfinder Mount - For Garmin
Marine Fishfinder Mount for Garmin Striker. Rubber 1" ball and socket technology dampens shock and vibration, as well as allowing for almost infinite adjustment and perfect viewing angles. Also compatible with a range of different mounts, which are listed below.
M4 Bolts required to attach fish finder base to Ram Mount- sold seperately
M5 Bolts required to attach Ram Mount to kayak/boat - sold seperately
Price £27.89 (RRP £30.99 - Saving £3.10)
Railblaza R-Lock Garmin Fish Finder Mount
A fully adjustable fish finder mounting platform featuring lockable friction swivel joints and a centre joint that can be positioned in increments of 15 degrees. This allows for optimal position of your fish finder screen. Will take fish finders up to 1.5kgs in weight. Simply mount onto any Railblaza StarPort base mount.
Starport base mount required - sold seperately
Price £28.01 (RRP £32.95 - Saving £4.94)
Well Nuts with Marine Grade Stainless Steel M5 Bolts - Pack of 4
These are one of the best choices for mounting hardware and work perfectly for mounting a fish finder base mount to your kayak.
Price £3.99
Marine Tri-Fold Rivets - Pack of 10
The ideal choice of fixing to use when mounting fishfinder mounts & bases to your kayak when you cannot gain access to inside the hull.
Price £6.50
Stainless Steel Fitting Kit - M5 - Bolts/Washers/Nuts
Bolts, Nuts and Washers are the strongest option for fixing an accessory to your kayak. Supplied as a pack of 4. M5 bolt size and made from A4 (316) Marine Grade Stainless Steel. M5 fits Ram Mount bases, many fish finder bases and can be used for many other fitting applications
Price £2.99
If you need any help on deciding which mounting option is best for you, please refer to our Fish Finder Buyers Guide
Transducer Installation Options
If you would like more info on installing a transducer to your kayak, please refer to our Fish Finder Buyers Guide
In-Hull Installation
Sikaflex EBT+ Clear - Transducer Adhesive
A strong and flexible waterproof adhesive. Ideal for glueing a fish finder transducer to the hull of a kayak. Also useful as a sealent when installing other accessories. Supplied as a 300ml cartridge tube.
Price £11.95
Scanstrut Deck Seal - Cable Gland - Upto 21mm
A Cable Gland is the best option for routing the transducer cabling from the Fish Finder headunit down in through the kayak hull. This is the correct sized cable gland for the Garmin Transducer Cabling. It can also be used for routing the battery cables inside the hull.
Price £25.80
Arm-Mounted Installation
RAM Transducer Arm with Diamond Base
Compatible with both Lowrance and Humminbird Transducers, this arm allows you to hang your transducer directly over the side of your kayak and into the water. This makes for a quick release mounting system.
Price £55.99
Railblaza Transducer Arm XL - 700mm
The Transducer Arm XL is an easy way to mount your fish finder transducer. Simply bolt the transducer to the bottom of the arm and mount the arm to your kayak! NOTE: This kit requires a Sideport to mount the transducer arm. These can either be fixed straight to the hull of the kayak using the fixings supplied with the ports, or they can be mounted on slide tracks, as shown in the images above, using the appropriate TracMount Kit.
Price £39.06 (RRP £45.95 - Saving £6.89)
Fish Finder - Power Options
12v 7ah SLA - Fish Finder Battery
Ideal for powering your Fish Finder. A 12V 7aH SLA battery provides ample charge for 1-2 fishing sessions. Once the battery charge has been run down it needs to be recharged and this is best done using a 12V trickle charger.
Price £26.00
Feelfree 5 Litre Dry Tube - Battery Bag
A great option for dry storing your Fish Finder battery inside the hull of your kayak. This power cables can easily roll down with the top of the dry bag, whilst still making a dry seal.
Price £11.96 (RRP £15.95 - Saving £3.99)
Scanstrut Deck Seal - Cable Gland - Upto 16mm
A Cable Gland is the best option for routing the power cabling from your Fish Finder Headunit in through the hull and to your battery. This is the correct size for just the battery cable to pass through.
Price £22.20
If you would like more info on powering your Fish Finder, please refer to our Fish Finder Buyers Guide
Delivery
Nationwide delivery available for the Garmin Striker 4. Delivery price will be shown in the shopping basket prior to checkout. For full details on delivery please see: Delivery Information
Click & Collect - Stores Nationwide
Nationwide Click & Collect available for the Garmin Striker 4. Collection for orders placed online can be made from any of our Canoe Shops UK Stores. For full details on our Click & Collect service, please see: Nationwide Click & Collect
